Veto Pro Pac TECH-PAC MC Blackout Tool Backpack BUILD OUT BAG (No Panels) + SB-LD Hybrid Tool / Meter Pouch FREE

Description

PLEASE NOTE THIS TOOL BAG IS EMPTY – NO PANELS – PLEASE ORDER PANELS SEPERATLEY TO CREATE YOUR DESIRED CONFIGURATION

WHAT’S THE DIFFERENCE BETWEEN A BLACKOUT AND A BLACKOUT/BUILD-OUT BAG?

Tool and Meter panels are included when you purchase the “Blackout” version. This “Blackout Build-Out” version requires you to purchase any two panels you want. Both allow you to purchase any additional panels for various configurations and maximum flexibility to handle any job.

The TECH PAC MC BLACKOUT BUILD-OUT is a stealth version of the popular TECH PAC MC backpack featuring Veto Pro Pac’s proprietary V-SWAP™ system. You must purchase at least 2 panels at the time of purchase. The bag is not sold without panels. Alternative tool pocket panels, all sold separately, can be added & swapped-out enabling tool, gear or job specific storage solutions.

PRODUCT SPECIFICATIONS:

• Height: 17″ (43cm)
• Width: 12” (31cm)
• Depth: 9” (23cm)
• Handle Height: 19″ (48cm)
• Weight (empty): 8 lbs. (3.5kg)
• Max Payload: 35lbs (16kg)
• Internal Volume: 1100in3/18L

MAXIMIZED TOOL STORAGE CAPACITY:

• V-SWAP™ removable tool pocket panel system
• Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately
• Tactical all-black construction
• Interior magnetic screw catcher
• Thermoformed cushioned EVA back pad
• Waterproof polypropylene plastic base
• Quick release metal hasp supports load & allows easy access to rear storage bay
• YKK® zippers
• 5 Year Limited Warranty

OTHER FEATURES:

• Warranty: 5 Years (see Veto warranty terms and conditions)

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

• Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

• Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

• Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!